TIPS

All work is D.I.Y. A professional finish sets it apart!

Use these tips to achieve a professional finish.

Building River & Canal boats.

Wide beam’s and Narrow Boats

A brief idea of their Restrictions and Use

I’ve over 30 years living on and building narrowboats and over 10 years, building wide beams. Over 60 boats built in total. I’ve not been everywhere on a narrowboat so I can’t boast to know all the facts. Please feel free to take advantage of my expansive and expensive learning curve. I believe the information I’m putting together here, could help save you a lot of time, money and assist you greatly in designing and making you a much better boat.

The Main Differences & The same rules roughly apply, anywhere in the world on any boat.

Narrow Boats up to 57ft are for traveling everywhere in the UK, on navigable rivers and canals. Any longer than 57-58ft and you get length restrictions in locks.

Wide Beams are for most navigable rivers and wide canals, they are not for narrow canals.

Although the benefits of a narrowboat are obvious for traveling, the benefits of a wide beam are huge for living on board and costs. “You can live on either”. These two big benefits of a wide beam are the additional living space, and depending on dimensions, you can re-claim the VAT in the UK, which can add up to a huge amount of money. There are various sites that you can use to check the VAT status. HMRC is a good start.

Note: On all boats, always take into account, air draft for minimum height of bridges, water draft for the minimum depth of water, beam of the boat for the minimum width of the river and length for the minimum inner length of locks. There are websites that you will find to check these facts out. For the UK, British Waterways have lots of information. Never travel in floods or on waterways that are deemed not navigable.

Air draft is the height of the boat above the waterline. Water draft is the depth of the boat in the water. Beam of the boat is the maximum width of the boat.

So above you have a brief description of what I believe are the main differences of steel river and canal boats, depending on how you wish to use/live aboard one.

Narrowboat or Wide-beam

  1. It’s your decision

Some of the first things you need to take into account when you make your decisions and start planning your boat are:

  • Where are you going to moor
  • Can it travel where you wish to go
  • How much space do you require inside
  • And most importantly your budget.

2. Size & Type of boat .

Look for a reputable boat builder. Let them know the type and dimensions of the boat you’re thinking about buying and get a rough price for, fully fitted, sail away plus, sail away or a shell with paintwork & no engine or finally just a shell. There are lots of possible stages so be careful and plan wisely.

The following are some of the questions you should to ask yourself if you decide to complete a self-fit sailaway or shell:

3. Self-Build

  • What facilities and equipment do I have?
  • Do I have the knowhow and determination to complete the work, to the level I would like?
  • Do I have the budget?

4. Budgeting

I always worked on (depending on quality of fit out) £15,000 to £25,000 for a self-completed fit out in the cabin. Depending on your skill level and the amount of spare time you have, the job will probably take years not months. That doesn’t mean you can’t live on or use the boat whilst you are fitting it out and spread the cost relative to your income.

Add the fit-out budget to the cost of the part fitted boat, quoted by the boat builder. Compare against a completed full fit boat of the same size and your capabilities before you start ordering.

Planning Stages

Below is a list of stages that will need to be completed, in roughly the order they need to be completed in the cabin only. I will try to explain the reason for each stage and give tips on how to complete them in the very near future. First find a mooring!!!

  1. Decide what boat you want and ask the boat builder for the dimensions for the inside of cabin.
  2. Planning including budget. “Double check everything before you order”.
  3. Order the shell with or without paint and windows. Decide double glazed or single windows.
  4. Receive the shell.
  5. Fit the base floor.
  6. Mark the rooms out on the floor.
  7. Battening.
  8. Insulation.  
  9. Wiring.
  10. Fit room bulkheads.
  11. Panelling, sockets and lighting.
  12. Utility’s.
  13. Flooring. Don’t forget to protect the final flooring!
  14. Cupboards and other furnishings.
  15. Any additional details.

That’s it for now. There’s a lot more to come and I have no doubt I left a few things out. So please, I would love to receive and answer any questions you have.

Cheers Les

A stunning narrowboat. A go anywhere boat, on the UK’s inland waterways.



%d bloggers like this: